Wet Scrubbers

Product Details:

We supply So2 Tower FRP on turnkey basis which could be made of FRP, PP/FRP, FRV, PVC/FRP etc depending upon the clients requirement & type of fumes eliminated during the process, We design scrubbing system for any type of hazardous fumes like H2So4, Hcl, So2, Nh3, No3, etc. For designing of efficient scrubbing system following data is required from the client depending on which the type of scrubber is decide.

Additional Information:

• Item Code: UKES-STWS
• Production Capacity: As per requirement
• Delivery Time: 20 Days
• Packaging Details: Bubble Wrap

Product Details:

"UK ENVIRO" custom-designs and produces low-cost, low-maintenance Gas Absorption System; it is widely used in stainless steel pickling plants, chrome plating plants, zinc plating plants, electroplating plants, anodizing plants, hot-dip galvanizing plants, pipe pickling plants, chemical process plants etc.

Details:

• Fumes are absorbed through the Fume hoods and taken to the Scrubber unit through Thermoplastic ducting. Inside the scrubber unit, the gases are absorbed in the scrubbing liquid and returned to the circuit thus letting only Clean Air come out through Stack/Chimney.
• Our Scrubber system will be complete with Fume hoods, Exhaust Ducting, Blower, Column of Raschig/Pall rings, Spray Nozzles, Circulation Pump, Collection Sump, Mist Eliminator, etc.
• Each Scrubber System is individually designed to optimize the particular application which ensures “Very High Separation Efficiencies in Scrubbing” and “Complete Compliance of emission norms”.

Application Area:

• Stainless Steel Pickling Plants, Chrome Plating Plants, Zinc Plating Plants, Electroplating plants, Anodizing Plants, Hot-dip Galvanizing plants, Pipe Pickling Plants, Wire Pickling Plants, Coil Pickling Plants, Metal Finishing Plants, Surface Treatment Plants
• waste water treatment plants.
• Fumes are absorbed through the Fume hoods and taken to the Scrubber unit through Thermoplastic ducting. Inside the scrubber unit, the gases are absorbed in the scrubbing liquid and returned to the circuit thus letting only Clean Air come out through Stack/Chimney.
• Our Scrubber system will be complete with Fume hoods, Exhaust Ducting, Blower, Column of Raschig/Pall rings, Spray Nozzles, Circulation Pump, Collection Sump, Mist Eliminator, etc.
• Each Scrubber System is individually designed to optimize the particular application which ensures “Very High Separation Efficiencies in Scrubbing” and “Complete Compliance of emission norms”
• Designing of the entire system is done using our In-house Indigenously developed “CORFACT Design module”; developed by our Design R&D team through in-depth study and 25 years of unmatched experience and Subject Matter Expertise.

Additional Information:

• Item Code: UKES-GAS
• Production Capacity: As per requirement
• Delivery Time: 30 Days
• Packaging Details: Bubble Wrap

Product Details:

UK Enviro design & manufacture high efficiency Wet Scrubber For Wire Pickling for meeting pollution control board’s norms for outlet emission. Our equipments used for a wide range of gases-fumes-dusts, such as Acid fumes (HCL, H2SO4, HNO3 etc) HCL gas-cl2-so2-Nox-NH3-H2S-FLU gases – Furnace gases & other gaseous effluent. Bases on your process and end product disposal requirements various scrubber configurations are available such as:

Other Details:

• Wet scrubber, Packed Bed columns, Absorption columns
• Chlorination column, Spray tower
• Venturi scrubbers
• Wide range of material of construction – FRP, GRP, PP, PVC, PVDF, MS, SS.

Process:

The fume extraction plants work by scrubbing the exhaust air, preventing the release of aggressive and harmful vapors into the environment. Vapours and gases are absorbed in the scrubbing liquid and returned to the circuit. The most important basis for calculations is the determination of the exhaust air volume and the dependence of the pre-treatment plant. All the calculations are performed by program modules developed by UK Enviro. Effective scrubbing and guaranteed compliance with emission limits can only be achieved through an individually designed fume extraction plant optimized on the particular application.

 

Advantages:

UK Enviro fume extractor plants are specifically designed for improvement working condition and environment in industries. This system provides significant advantages of less wear and tear of the machines and much lower cleaning costs. Some of the other advantages include:

 

• Clean Working Area (surrounding)
• Hygienic working atmosphere.
• High employees' acceptance.
• Increased productivity.
• Prevents corrosion of crane & roof structure.
• Increased safety.
• Fumes are condensed & recycled, optimizing material use.
• Reducing waste disposal cost.

 

Wet Scrubber For Wire Pickling comprises of following equipments:

• Suction Hoods/Lip Ducts
• Ducting
• Scrubbers
• Blowers
• Chimney
• Pump for Scrubbing Liquid

Additional Information:

• Item Code: UKES-FRP-WS
• Production Capacity: as per requirement
• Delivery Time: 10 DAYS
• Packaging Details: BUBBLE WRAP

Product Details:

-Our focus remains on delivering economical product with low maintenance cost to achieve maximum output.

Airflow: 1000-50000 CFM
Power: 1-50hp

NOTE: Price will change according to the product specificaions.

Additional Information:

• Production Capacity: 20
• Delivery Time: 30 Days

Product Details:

UK Enviro design & manufacture high efficiency Scrubber System for meeting pollution control board’s norms for outlet emission. Our equipments used for a wide range of gases-fumes-dusts, such as Acid fumes (HCL, H2SO4, HNO3 etc) HCL gas-cl2-so2-Nox-NH3-H2S-FLU gases – Furnace gases & other gaseous effluent. Bases on your process and end product disposal requirements various scrubber configurations are available such as:

Other Details:

• Wet scrubber, Packed Bed columns, Absorption columns
• Chlorination column, Spray tower
• Venturi scrubbers
• Wide range of material of construction – FRP, GRP, PP, PVC, PVDF, MS, SS.

Process:

 

The fume extraction plants work by scrubbing the exhaust air, preventing the release of aggressive and harmful vapors into the environment. Vapours and gases are absorbed in the scrubbing liquid and returned to the circuit. The most important basis for calculations is the determination of the exhaust air volume and the dependence of the pre-treatment plant. All the calculations are performed by program modules developed by UK Enviro. Effective scrubbing and guaranteed compliance with emission limits can only be achieved through an individually designed fume extraction plant optimized on the particular application.

Advantages:

UK Enviro fume extractor plants are specifically designed for improvement working condition and environment in industries. This system provides significant advantages of less wear and tear of the machines and much lower cleaning costs.

Other Advantages:

 

• Clean Working Area (surrounding)
• Hygienic working atmosphere.
• High employees'' acceptance.
• Increased productivity.
• Prevents corrosion of crane & roof structure.
• Increased safety.
• Fumes are condensed & recycled, optimizing material use.
• Reducing waste disposal cost.

 

Scrubber System comprises of following equipments:

• Suction Hoods/Lip Ducts
• Ducting
• Scrubbers
• Blowers
• Chimney
• Pump for Scrubling Liquid

We design and fabricate these wet scrubber system to Rajasthan, bhiwadi, neemrana, alwar, jaipur, bikaner, barmer, beawar, kota, haryana, gurgaon, dharuhera, rewari, sonepat, panipat, karnal, hissar, rohtak, sirsa, bhiwani, manesar, punjab, derabassi, ludhiana, baddi, mohali, barotiwala, nalagarh, panchkula, lalru, ambala, rajpura, haridwar, roorkee, rudrapur, sitarganj, kashipur, moradabad, rampur, noida, ghaziabad, hapur, aligarh, gajraula etc

Additional Information:

• Item Code: UKES-FRP-WSS
• Production Capacity: As per Requirement
• Delivery Time: 30 DAYS
• Packaging Details: Bubble Wrap

Product Details:

Being the foremost organization, we rule the market by offering an exclusive collection of Wet Scrubbers. The offered products are air pollution control devices that use liquid to remove particulate matter or gases from an industrial exhaust or flue gas stream. In addition, our offered array is highly appreciated among our clients for its attractive features.

Features:

• Handle Flammable & explosive dust with low risk
• Corrosive gases & dust can be neutralized
• Cooling of Hot gases

Additional Information:

• Item Code: UKES-WS
• Production Capacity: as per requirement
• Delivery Time: 20 days
• Packaging Details: BUBBLE WRAP

Product Details:

UK Enviro design & manufacture high efficiency Wet Scrubber For Hot Dip Galvanizing for meeting pollution control board’s norms for outlet emission. Our equipments used for a wide range of gases-fumes-dusts, such as Acid fumes (HCL, H2SO4, HNO3 etc) HCL gas-cl2-so2-Nox-NH3-H2S-FLU gases – Furnace gases & other gaseous effluent. Bases on your process and end product disposal requirements various scrubber configurations are available such as:

Other Details:

• Wet scrubber, Packed Bed columns, Absorption columns
• Chlorination column, Spray tower
• Venturi scrubbers
• Wide range of material of construction – FRP, GRP, PP, PVC, PVDF, MS, SS.

Process:

The fume extraction plants work by scrubbing the exhaust air, preventing the release of aggressive and harmful vapors into the environment. Vapours and gases are absorbed in the scrubbing liquid and returned to the circuit. The most important basis for calculations is the determination of the exhaust air volume and the dependence of the pre-treatment plant. All the calculations are performed by program modules developed by UK Enviro. Effective scrubbing and guaranteed compliance with emission limits can only be achieved through an individually designed fume extraction plant optimized on the particular application.

Advantages:

UK Enviro fume extractor plants are specifically designed for improvement working condition and environment in industries. This system provides significant advantages of less wear and tear of the machines and much lower cleaning costs.

Other Advantages:

• Clean Working Area (surrounding)
• Hygienic working atmosphere.
• High employees' acceptance.
• Increased productivity.
• Prevents corrosion of crane & roof structure.
• Increased safety.
• Fumes are condensed & recycled, optimizing material use.
• Reducing waste disposal cost.

 

Wet Scrubber For Hot Dip Galvanizing comprises of following equipments:

• Suction Hoods/Lip Ducts
• Ducting
• Scrubbers
• Blowers
• Chimney
• Pump for Scrubbing Liquid

Additional Information:

• Item Code: UKES-HC
• Production Capacity: 100
• Delivery Time: 20 DAYS
• Packaging Details: Bubble backing

Product Details:

Our organization has successfully expanded its business in market owing to the offered elevated quality array of Wet Scrubber for Galvanising Industry. our offered scrubbers are manufactured with perfection at our state-of-the-art infrastructure unit. This wet scrubber is acclaimed in the industry due to its excellent functionality, high durability, corrosion resistance and robust construction. Our offered wet scrubber can be availed from us in various specifications as per the customer’s requirements.

Features:

• Rugged construction
• High performance
• Long performing life

Additional Information:

• Item Code: UKES-WSGI
• Production Capacity: As per requirement
• Delivery Time: 20 Days
• Packaging Details: Bubble Wraps

Product Details:

Venturi Scrubber designed using latest technology, these scrubbers are sturdy and easy to maintain & operate. Our range is known for high performance and is a cost effective way to remove impurities and contaminants from air.

The basic unit consists of:

• Shell
• Liquid Injector
• Vacuum creating cones
• Gas and liquid entrance and exit nozzles

Additional Information:

• Item Code: UKES-VSS
• Production Capacity: As per requirement
• Delivery Time: 20 Days
• Packaging Details: Bubble Wrap

Product Details:

We at "UK Enviro" design & manufactured PP FRP Scrubber its body consist pp & frp have superior corrosion resistant, anti-leakage, lightweight and cost-effective, which is a better choice for industries and factories.

Application:

• Plating & phosphating industry
• Hot dip galvanising industry
• Pickling line
• Chemical processing
• Drugs & pharma industry
• Steel industry

Product Details:

Our designed Acid Fume Extraction System to be incorporated in steel pickling lines.

 

Other Details:

• The production of a ventilation system that included a fume scrubber, a stack, two fans and all interconnecting ducting;
• The fabrication of covers for 13 acid pickling tanks (where the plant's product is cleaned) and covers for three rinse tanks;
• The molding of fiberglass reinforced plastics (FRP) drip trays to protect the incoming strip of steel from acid that might splash onto it from the pickling process and mar the appearance of the finished product.

 

Additional Information:

• Item Code: UKES-FS
• Production Capacity: 100
• Delivery Time: 30 days
• Packaging Details: BUBBLE PACKING

Product Details:

We design & manufacturer Fume Extraction System. The Acid Fume Scrubbers we make available are made from 100% corrosion resistant thermoplastic material and has a long life. Our Acid Fume Scrubbers are widely used in stainless steel pickling plants, chrome plating plants, zinc plating plants, electroplating plants, anodizing plants, hot-dip galvanizing plants, pipe pickling plants, etc.

Details:

• Fumes are absorbed through the Fume hoods and taken to the Scrubber unit through Thermoplastic ducting. Inside the scrubber unit, the gases are absorbed in the scrubbing liquid and returned to the circuit thus letting only Clean Air come out through Stack/Chimney.
• Our Scrubber system will be complete with Fume hoods, Exhaust Ducting, Blower, Column of Raschig/Pall rings, Spray Nozzles, Circulation Pump, Collection Sump, Mist Eliminator, etc.
• Each Scrubber System is individually designed to optimize the particular application which ensures “Very High Separation Efficiencies in Scrubbing” and “Complete Compliance of emission norms”

Application Area:

• Stainless Steel Pickling Plants, Chrome Plating Plants, Zinc Plating Plants, Electroplating plants, Anodizing Plants, Hot-dip Galvanizing plants, Pipe Pickling Plants, Wire Pickling Plants, Coil Pickling Plants, Metal Finishing Plants, Surface Treatment Plants
• Fumes are absorbed through the Fume hoods and taken to the Scrubber unit through Thermoplastic ducting. Inside the scrubber unit, the gases are absorbed in the scrubbing liquid and returned to the circuit thus letting only Clean Air come out through Stack/Chimney.
• Our Scrubber system will be complete with Fume hoods, Exhaust Ducting, Blower, Column of Raschig/Pall rings, Spray Nozzles, Circulation Pump, Collection Sump, Mist Eliminator, etc.
• Each Scrubber System is individually designed to optimize the particular application which ensures “Very High Separation Efficiencies in Scrubbing” and “Complete Compliance of emission norms”
• Designing of the entire system is done using our In-house Indigenously developed “CORFACT Design module”; developed by our Design R&D team through in-depth study and 25 years of unmatched experience and Subject Matter Expertise.

Additional Information:

• Item Code: UKES-FES-FRP
• Production Capacity: as per requirement
• Delivery Time: 20 DAYS
• Packaging Details: BUBBLE WRAP

Product Details:

We are an established Manufacturer and exporter of Fiberglass ducting; We offer Fiberglass Duct in different thermoplastic materials like PP, PVC, PVDF reinforced with FRP.

Other Details:

• Ducts can be made in ALL SIZES and any Standard shape or Custom shape as per client requirement
• We also provide Damper Valves, Elbows, Couplers, Flanges and other accessories for Fresh Air Ducting

Additional Information:

• Item Code: UKES-PP-D
• Production Capacity: as per requirement
• Delivery Time: 20 DAYS
• Packaging Details: BUBBLE WRAP

Product Details:

UK Enviro design & manufacture high efficiency Acid Fume Extraction Systems for meeting pollution control board’s norms for outlet emission. Our equipments used for a wide range of gases-fumes-dusts, such as Acid fumes (HCL, H2SO4, HNO3 etc) HCL gas-cl2-so2-Nox-NH3-H2S-FLU gases – Furnace gases & other gaseous effluent. Bases on your process and end product disposal requirements various scrubber configurations are available such as:

Features:

• Wet scrubber, Packed Bed columns, Absorption columns
• Chlorination column, Spray tower
• Venturi scrubbers

Process:

• The fume extraction plants work by scrubbing the exhaust air, preventing the release of aggressive and harmful vapors into the environment. Vapours and gases are absorbed in the scrubbing liquid and returned to the circuit. The most important basis for calculations is the determination of the exhaust air volume and the dependence of the pre-treatment plant. All the calculations are performed by program modules developed by UK Enviro. Effective scrubbing and guaranteed compliance with emission limits can only be achieved through an individually designed fume extraction plant optimized on the particular application.

 

Advantages:

• UK Enviro fume extractor plants are specifically designed for improvement working condition and environment in industries. This system provides significant advantages of less wear and tear of the machines and much lower cleaning costs.

Other Advantages:

• Clean Working Area (surrounding)
• Hygienic working atmosphere.
• High employees' acceptance.
• Increased productivity.
• Prevents corrosion of crane & roof structure.
• Increased safety.
• Fumes are condensed & recycled, optimizing material use.
• Reducing waste disposal cost.

FRP Wet Scrubber comprises of following equipments:

• Suction Hoods/Lip Ducts
• Ducting
• Scrubbers
• Blowers
• Chimney
• Pump for Scrubbing Liquid

Product Details:

UK Enviro design & manufacture high efficiency Acid Neutralizing Scrubber for meeting pollution control board’s norms for outlet emission. Our equipments used for a wide range of gases-fumes-dusts, such as Acid fumes (HCL, H2SO4, HNO3 etc) HCL gas-cl2-so2-Nox-NH3-H2S-FLU gases – Furnace gases & other gaseous effluent. Bases on your process and end product disposal requirements various scrubber configurations are available such as:

Process:

• The fume extraction plants work by scrubbing the exhaust air, preventing the release of aggressive and harmful vapors into the environment. Vapours and gases are absorbed in the scrubbing liquid and returned to the circuit. The most important basis for calculations is the determination of the exhaust air volume and the dependence of the pretreatment plant. All the calculations are performed by program modules developed by UK Enviro. Effective scrubbing and guaranteed compliance with emission limits can only be achieved through an individually designed fume extraction plant optimized on the particular application.

Advantages:

• UK Enviro fume extractor plants are specifically designed for improvement working condition and environment in industries. This system provides significant advantages of less wear and tear of the machines and much lower cleaning costs.

Other Advantages:

• Clean Working Area (surrounding)
• Hygienic working atmosphere.
• High employees' acceptance.
• Increased productivity.
• Prevents corrosion of crane & roof structure.
• Increased safety.
• Fumes are condensed & recycled, optimizing material use.
• Reducing waste disposal cost.

FRP Wet Scrubber comprises of following equipments:

• Suction Hoods/Lip Ducts
• Ducting
• Scrubbers
• Blowers
• Chimney
• Pump for Scrubbing Liquid

Other Details:

• Wet scrubber, Packed Bed columns, Absorption columns
• Chlorination column, Spray tower
• Venturi scrubbers
• Wide range of material of construction – FRP, GRP, PP, PVC, PVDF, MS, SS.

Additional Information:

• Item Code: UKES-ANS
• Production Capacity: As per requirement
• Delivery Time: 30 Days
• Packaging Details: Bubble Wrap

Product Details:

UK Enviro design & manufacture high efficiency Chlorine Leak Absorption System for meeting pollution control board’s norms for outlet emission. Our equipments used for a wide range of gases-fumes-dusts, such as Acid fumes (HCL, H2SO4, HNO3 etc) HCL gas-cl2-so2-Nox-NH3-H2S-FLU gases – Furnace gases & other gaseous effluent. Bases on your process and end product disposal requirements various scrubber configurations are available such as:

Process:

• The fume extraction plants work by scrubbing the exhaust air, preventing the release of aggressive and harmful vapors into the environment. Vapours and gases are absorbed in the scrubbing liquid and returned to the circuit. The most important basis for calculations is the determination of the exhaust air volume and the dependence of the pretreatment plant. All the calculations are performed by program modules developed by UK Enviro. Effective scrubbing and guaranteed compliance with emission limits can only be achieved through an individually designed fume extraction plant optimized on the particular application.

Advantages:

• UK Enviro fume extractor plants are specifically designed for improvement working condition and environment in industries. This system provides significant advantages of less wear and tear of the machines and much lower cleaning costs.

Other Advantages:

• Hygienic working atmosphere.
• High employees' acceptance.
• Increased productivity.
• Prevents corrosion of crane & roof structure.
• Increased safety.
• Fumes are condensed & recycled, optimizing material use.
• Reducing waste disposal cost.

FRP Wet Scrubber comprises of following equipments:

• Suction Hoods/Lip Ducts
• Ducting
• Scrubbers
• Blowers
• Chimney
• Pump for Scrubbing Liquid

Other Details:

• Wet scrubber, Packed Bed columns, Absorption columns
• Chlorination column, Spray tower
• Venturi scrubbers
• Wide range of material of construction – FRP, GRP, PP, PVC, PVDF, MS, SS.

Additional Information:

• Item Code: UKES-CLAS
• Production Capacity: As per requirement
• Delivery Time: 20 Days
• Packaging Details: Bubble Wrap

Product Details:

UK Enviro design & manufacture high efficiency FRP Scrubber System for meeting pollution control board’s norms for outlet emission. Our equipments used for a wide range of gases-fumes-dusts, such as Acid fumes (HCL, H2SO4, HNO3 etc) HCL gas-cl2-so2-Nox-NH3-H2S-FLU gases – Furnace gases & other gaseous effluent. Bases on your process and end product disposal requirements various scrubber configurations are available such as:

Process:

• The fume extraction plants work by scrubbing the exhaust air, preventing the release of aggressive and harmful vapors into the environment. Vapours and gases are absorbed in the scrubbing liquid and returned to the circuit. The most important basis for calculations is the determination of the exhaust air volume and the dependence of the pretreatment plant. All the calculations are performed by program modules developed by UK Enviro. Effective scrubbing and guaranteed compliance with emission limits can only be achieved through an individually designed fume extraction plant optimized on the particular application.

Advantages:

• UK Enviro fume extractor plants are specifically designed for improvement working condition and environment in industries. This system provides significant advantages of less wear and tear of the machines and much lower cleaning costs.

Other Advantages:

• Clean Working Area (surrounding)
• Hygienic working atmosphere.
• High employees' acceptance.
• Increased productivity.
• Prevents corrosion of crane & roof structure.
• Increased safety.
• Fumes are condensed & recycled, optimizing material use.
• Reducing waste disposal cost.

FRP Wet Scrubber comprises of following equipments:

• Suction Hoods/Lip Ducts
• Ducting
• Scrubbers
• Blowers
• Chimney
• Pump for Scrubbing Liquid

Other Details:

• Wet scrubber, Packed Bed columns, Absorption columns
• Chlorination column, Spray tower
• Venturi scrubbers
• Wide range of material of construction – FRP, GRP, PP, PVC, PVDF, MS, SS.

Product Details:

UK Enviro design & manufacture high efficiency Fume Scrubber for meeting pollution control board’s norms for outlet emission. Our equipments used for a wide range of gases-fumes-dusts, such as Acid fumes (HCL, H2SO4, HNO3 etc) HCL gas-cl2-so2-Nox-NH3-H2S-FLU gases – Furnace gases & other gaseous effluent. Bases on your process and end product disposal requirements various scrubber configurations are available such as:

Other Details:

• Wet scrubber, Packed Bed columns, Absorption columns
• Chlorination column, Spray tower
• Venturi scrubbers
• Wide range of material of construction – FRP, GRP, PP, PVC, PVDF, MS, SS.

Process:

 

The fume extraction plants work by scrubbing the exhaust air, preventing the release of aggressive and harmful vapors into the environment. Vapours and gases are absorbed in the scrubbing liquid and returned to the circuit. The most important basis for calculations is the determination of the exhaust air volume and the dependence of the pretreatment plant. All the calculations are performed by program modules developed by UK Enviro. Effective scrubbing and guaranteed compliance with emission limits can only be achieved through an individually designed fume extraction plant optimized on the particular application.

Advantages:

 

UK Enviro fume extractor plants are specifically designed for improvement working condition and environment in industries. This system provides significant advantages of less wear and tear of the machines and much lower cleaning costs.

 

Other Advantages:

• Clean Working Area (surrounding)
• Hygienic working atmosphere.
• High employees' acceptance.
• Increased productivity.
• Prevents corrosion of crane & roof structure.
• Increased safety.
• Fumes are condensed & recycled, optimizing material use.
• Reducing waste disposal cost.

 

Fume Scrubber comprises of following equipments:

• Suction Hoods/Lip Ducts
• Ducting
• Scrubbers
• Blowers
• Chimney
• Pump for Scrubbing Liquid

Additional Information:

• Production Capacity: 20
• Delivery Time: 15 DAYS

Product Details:

Plating Fume Scrubber consists of solubising a gaseous pollutant in a liquid. This liquid can be either water or water with a reagent or a solvent. There are different types of gas scrubbers i.e. random packed scrubbers, spray gas scrubbers and venturi scrubbers. The choice of which type/model to be used depends on the characteristics of the gas to be removed. Extraction of vapors from the surface treatment baths and treatment to legislation. “UK ENVIRO” will be your partner in helping 'you' choose the most appropriate solution for the design of the fume capture and extraction systems, chemical and mechanical engineering of the fume scrubbing unit for your needs and assist with the installation and commissioning of the plant to an agreed discharge concentration. In the metal process industry extract and treat the vapors produced by the metal sheets and wires during the pickling process such as hydrochloric acid pickling. Through extraction and treatment, we ensure the well being of the people working with the machines as well as compliance with all the know standards. UK ENVIRO” offers a complete range of fume scrubbing units backed by a comprehensive design, manufacturing and installation service. Packed Bed type scrubbers and degasser are used for removal of gas, vapors, chemical mist etc. These scrubbers are cylindrical towers and are packed with plastic tower packing or any other suitable packing for particular application. The scrubbers are provided with water spraying arrangement which can be supplied in various sizes with gas velocities ranging from 0.5m/sec to 2m/sec and pressure drop between 50 mmwg and 750 mmwg pumps/gaseous contaminates travel vertically upwards while caustic liquid/water is sprayed from top, over the tower packing. Td he liquid is recirculated with pump. Additionally, packed bed scrubbers offered, mostly counter current scrubbers, which can collect efficiently particulars up to a size of 4-5 micron. Packed towers are used as contacting equipment for gas-liquid system. It presents a cross section of a typical unit. The shell is usually cylindrical/although square wooden, light metal or reinforced plastic towers are used.

 

The basic unit consists of:

• Shell
• Packing (One or more sections)
• Packing supports (s)
• Liquid distributor (s)
• Intermediate supports and redistributors
• Gas and liquid entrance and exit nozzles
• Pump for liquid circulation

Additional Information:

• Item Code: UKES-PFS
• Production Capacity: As per requirement
• Delivery Time: 20 Days
• Packaging Details: Bubble Wraps

Product Details:

Sulphur Dioxide Column Gas Scrubbers consists of solubilise a gaseous pollutant in a liquid. This liquid can be either water or water with a reagent or a solvent. There are different types of gas scrubbers i.e. random packed scrubbers, spray gas scrubbers and venturi scrubbers. The choice of which type/model to be used depends on the characteristics of the gas to be removed. Extraction of vapors from the surface treatment baths and treatment to legislation. “UK ENVIRO” will be your partner in helping 'you' choose the most appropriate solution for the design of the fume capture and extraction systems, chemical and mechanical engineering of the fume scrubbing unit for your needs and assist with the installation and commissioning of the plant to an agreed discharge concentration. In the metal process industry extract and treat the vapors produced by the metal sheets and wires during the pickling process such as hydrochloric acid pickling. Through extraction and treatment, we ensure the well being of the people working with the machines as well as compliance with all the know standards.UK ENVIRO” offers a complete range of fume scrubbing units backed by a comprehensive design, manufacturing and installation service. Packed Bed type scrubbers and degasser are used for removal of gas, vapors, chemical mist etc. These scrubbers are cylindrical towers and are packed with plastic tower packing or any other suitable packing for particular application. The scrubbers are provided with water spraying arrangement which can be supplied in various sizes with gas velocities ranging from 0.5m/sec to 2m/sec and pressure drop between 50 mmwg and 750 mmwg pumps/gaseous contaminates travel vertically upwards while caustic liquid/water is sprayed from top, over the tower packing. Td he liquid is recirculated with pump. Additionally, packed bed scrubbers offered, mostly counter current scrubbers, which can collect efficiently particulars up to a size of 4-5 micron. Packed towers are used as contacting equipment for gas-liquid system. It presents a cross section of a typical unit. The shell is usually cylindrical/although square wooden, light metal or reinforced plastic towers are used.

Additional Information:

• Item Code: UKES-SCGS
• Production Capacity: As per requirement
• Delivery Time: 20 Days
• Packaging Details: Bubble Wraps

Product Details:

-We are widely appreciated by our clients, for our in depth product & process knowledge and quality of products.

Additional Information:

• Item Code: UKES-AFES
• Production Capacity: As per requirement
• Delivery Time: 20 Days
• Packaging Details: Bubble Wraps

Product Details:

We design and fabricate packed bed scrubber system for acidic fumes.The acidic fumes comes in wet scrubber through a centrifugal blower force connected with our wet scrubber system.This acidic fumes pass from the packed bed column and during this period of time these fume absorbed by the media filled in packed bed. and thes packed bed is in continous washing by spray system. So that these absorbed fumes will go down in storage tank and media should be clean to absorbe fresh fumes.Its a continous process.We suppy our packed bed tower/wet scrubber system to worlds leading companies all around the world.
We suppu in Punjab, ludhiana, chandigarh, mohali, derabassi, panchkula, ambala, lalru, rajasthan, bhiwadi, alwar, neemrana, jaipur, ajmer, bikaner, kota, barmer, gajraula, aligarh, moradabad, pilkhua, hapur, kashipur, ramnagar, bareilly, rudrapur, sitargajn, lalkua, haridwar, roorkee, ballabhgarh, kosi, agara etc.

Additional Information:

• Item Code: UKES-FRP-S
• Production Capacity: As per requirement
• Delivery Time: 20 Days
• Packaging Details: Bubble wrap

Product Details:

Florine Gas Wet Scrubber consists of solubising a gaseous pollutant in a liquid. This liquid can be either water or water with a reagent or a solvent. There are different types of gas scrubbers i.e. random packed scrubbers, spray gas scrubbers and venturi scrubbers. The choice of which type/model to be used depends on the characteristics of the gas to be removed. Extraction of vapors from the surface treatment baths and treatment to legislation. “UK ENVIRO” will be your partner in helping 'you' choose the most appropriate solution for the design of the fume capture and extraction systems, chemical and mechanical engineering of the fume scrubbing unit for your needs and assist with the installation and commissioning of the plant to an agreed discharge concentration. In the metal process industry extract and treat the vapors produced by the metal sheets and wires during the pickling process such as hydrochloric acid pickling. Through extraction and treatment, we ensure the well being of the people working with the machines as well as compliance with all the know standards. "UK ENVIRO” offers a complete range of fume scrubbing units backed by a comprehensive design, manufacturing and installation service. Packed Bed type scrubbers and degasser are used for removal of gas, vapors, chemical mist etc. These scrubbers are cylindrical towers and are packed with plastic tower packing or any other suitable packing for particular application. The scrubbers are provided with water spraying arrangement which can be supplied in various sizes with gas velocities ranging from 0.5m/sec to 2m/sec and pressure drop between 50 mmwg and 750 mmwg pumps/gaseous contaminates travel vertically upwards while caustic liquid/water is sprayed from top, over the tower packing. Td he liquid is recirculated with pump. Additionally, packed bed scrubbers offered, mostly counter current scrubbers, which can collect efficiently particulars up to a size of 4-5 micron. Packed towers are used as contacting equipment for gas-liquid system. It presents a cross section of a typical unit. The shell is usually cylindrical/although square wooden, light metal or reinforced plastic towers are used.

The basic unit consists of:

• Shell
• Packing (One or more sections)
• Packing supports (s)
• Liquid distributor (s)
• Intermediate supports and redistributors
• Gas and liquid entrance and exit nozzles
• Pump for liquid circulation

Additional Information:

• Item Code: UKES-FGWS
• Production Capacity: As per requirement
• Delivery Time: 30 Days
• Packaging Details: Bubble Wrap

Product Details:

PP FRP Wet Scrubber is used for removal of gas, vapors, chemical mist etc. these scrubbers are cylindrical towers and are packed with plastic tower packing or any other suitable packing for particular application. The scrubbers are provided with water spraying arrangement which can be supplied in various sizes with gas velocities ranging from 0.5m/sec to 2m/sec and pressure drop between 50 mmwg and 750 mmwg pumps/gaseous contaminates travel vertically upwards while caustic liquid/water is sprayed from top, over the tower packing. Td he liquid is recirculated with pump. Additionally, packed bed scrubbers offered, mostly counter current scrubbers, which can collect efficiently particulars up to a size of 4-5 micron. Packed towers are used as contacting equipment for gas-liquid system. It presents a cross section of a typical unit. The shell is usually cylindrical/although square wooden, light metal or reinforced plastic towers are used.

The basic unit consists of:

• Shell
• Packing (One or more sections)
• Packing supports (s)
• Liquid distributor (s)
• Intermediate supports and redistributors
• Gas and liquid entrance and exit nozzles
• Pump for liquid circulation

Additional Information:

• Item Code: UKES-PP-FRP-WS
• Production Capacity: As per requirement
• Delivery Time: 20 Days
• Packaging Details: Bubble Wrap